WP-5000
Features
- Cortex-A8 (1.0 GHz) / PXA270 (520 MHz) CPU
- Windows CE 7.0/5.0 Inside
- Hard Real-Time Capability
- Rich software support
- 64-bit Hardware Serial Number for Software Protection
- Local I/O Expansion Bus
- 10/100/1000 Mbit/s Ethernet Port
- 4 Serial Ports (RS-232/485)
Description
The ICP DAS WP-5000-CE7/WP-5000 series is the new generation PAC (Programmable Automation Controller). They are equipped with a Cortex-A8 (1 GHz)/PXA270 (520 MHz) CPU running a Windows CE 7.0/5.0 operating system, various connectivity (VGA, USB, Ethernet, RS-232/485) and I/O expansion bus.
The WP-5000-CE7/WP-5000 series has many advantages, including hard real-time capability, small core size, fast boot speed, interrupt handling at a deeper level, achievable deterministic control and low cost. Using Windows CE gives it the ability to run PC-based control software such as Visual Basic.NET, Visual C#, Embedded Visual C++, SCADA software, SoftPLC …etc. It give users all of the best features of both traditional PLCs and Windows capable PCs.
For hardware expansion, it also supports an I/O expansion bus. The I/O expansion bus can be used to implement various I/O functions such as D/I, D/O,A/ D, D/A, Timer/Counter, UART, and other I/O functions. Nearly all kinds of I/O functions can be implemented by this bus. But the bus can support only one board. There are more than 10 boards available for WP-5000-CE7/WP-5000 series, users can choose one of them to expand hardware features.
Windows CE5.0 Based PAC
- PXA270, 520 MHz CPU
- Windows CE 5.0
- Hard Real-Time Capability
- Rich software support
- Various Memory and Storage
- 128 MB SDRAM and 64 MB Flash
- 16 KB EEPROM for data retention
- 1 x microSD socket with one microSD card
- Various Communication Interfaces
- 2 x 10/100 Ethernet Ports
- 4 x Serial Ports (RS-232/485)
- 1 x USB 2.0 (host)
- Built-In VGA Port
- Built-In Real-time clock
- 64-bit Hardware Serial Number for Software Protection
- I/O Expansion Bus Interface
- 3 x LED Indicators
- Built-In dual Watchdog Timer
- Operating Temperature: -25 ~ +75 °C
Windows CE5.0 Based PAC
- PXA270, 520 MHz CPU
- Windows CE 5.0
- Hard Real-Time Capability
- Rich software support
- Various Memory and Storage
- 128 MB SDRAM and 64 MB Flash
- 16 KB EEPROM for data retention
- 1 x microSD socket with one microSD card
- Various Communication Interfaces
- 2 x 10/100 Ethernet Ports
- 4 x Serial Ports (RS-232/485)
- 1 x USB 2.0 (host)
- Built-In VGA Port
- Built-In Real-time clock
- 64-bit Hardware Serial Number for Software Protection
- I/O Expansion Bus Interface
- 3 x LED Indicators
- Built-In dual Watchdog Timer
- Audio with Microphone-in and Earphone-out
- Operating Temperature: -25 ~ +75 °C
Windows CE7.0 Based PAC
- Cortex-A8, 1 GHz CPU
- Windows CE 7.0
- Hard Real-Time Capability
- Rich software support
- Various Memory and Storage
- 512 MB SDRAM and 256 MB Flash
- 64 KB FRAM memory for data retention
- 1 x microSD socket with one microSD card
- Various Communication Interfaces
- 1 x 10/100/1000BASE-T Ethernet Port
- 4 x Serial Ports (RS-232/485)
- 1 x USB 2.0 (host)
- Built-In VGA Port
- Built-In Real-time clock
- 64-bit Hardware Serial Number for Software Protection
- I/O Expansion Bus Interface
- 6 x LED Indicators
- Built-In dual Watchdog Timer
- Operating Temperature: -25 ~ +75 °C
Windows CE7.0 Based PAC
- Cortex-A8, 1 GHz CPU
- Windows CE 7.0
- Hard Real-Time Capability
- Rich software support
- Various Memory and Storage
- 512 MB SDRAM and 256 MB Flash
- 64 KB FRAM memory for data retention
- 1 x microSD socket with one microSD card
- Various Communication Interfaces
- 1 x 10/100/1000BASE-T Ethernet Port
- 4 x Serial Ports (RS-232/485)
- 1 x USB 2.0 (host)
- Built-In VGA Port
- Built-In Real-time clock
- 64-bit Hardware Serial Number for Software Protection
- I/O Expansion Bus Interface
- 6 x LED Indicators
- Built-In dual Watchdog Timer
- Operating Temperature: -25 ~ +75 °C
- Metal Enclosure
Windows CE7.0 Based PAC with 3G
- Cortex-A8, 1 GHz CPU
- Windows CE 7.0
- Hard Real-Time Capability
- Rich software support
- Various Memory and Storage
- 512 MB SDRAM and 256 MB Flash
- 64 KB FRAM memory for data retention
- 1 x microSD socket with one microSD card
- Various Communication Interfaces
- 1 x 10/100/1000BASE-T Ethernet Port
- 4 x Serial Ports (RS-232/485)
- 1 x USB 2.0 (host)
- Built-In VGA Port
- Built-In Real-time clock
- 64-bit Hardware Serial Number for Software Protection
- I/O Expansion Bus Interface
- 6 x LED Indicators
- Built-In dual Watchdog Timer
- Industrial Tri-band 3G module
- 3G modem
- Operating Temperature: -25 ~ +75 °C
- Metal Enclosure
Windows CE7.0 Based PAC with 3G/4G
- Cortex-A8, 1 GHz CPU
- Windows CE 7.0
- Hard Real-Time Capability
- Rich software support
- Various Memory and Storage
- 512 MB SDRAM and 256 MB Flash
- 64 KB FRAM memory for data retention
- 1 x microSD socket with one microSD card
- Various Communication Interfaces
- 1 x 10/100/1000BASE-T Ethernet Port
- 4 x Serial Ports (RS-232/485)
- 1 x USB 2.0 (host)
- Built-In VGA Port
- Built-In Real-time clock
- 64-bit Hardware Serial Number for Software Protection
- I/O Expansion Bus Interface
- 6 x LED Indicators
- Built-In dual Watchdog Timer
- Industrial Tri-band 4G module
- 4G modem
- Operating Temperature: -25 ~ +75 °C
- Metal Enclosure
6-channel Voltage Input
1-channel Voltage Output
4-channel Digital Input
4-channel Digital Output
- Analog Input
- Channels: 6
- Range: ±5V, 0~5V
- Resolution: 12-bit
- Sampling Rate: 4kHz
- Analog Output
- Channels: 1
- Range: ±5V
- Resolution: 12-bit
- Capacity: 20mA
- Digital Input
- Channels: 4
- Type: Dry
- On Voltage Level: Close to GND
- Off Voltage Level: Open
- Digital Output
- Channels: 4
- Type: Open collector (Sink)
- Load Voltage: 10~40Vdc
- Max Load Current: 200mA/Channel
4-channel Voltage Input
2-channel Voltage Output
3-channel Digital Input
3-channel Digital Output
- Analog Input
- Channels: 4
- Range: ±10V
- Resolution: 12-bit
- Sampling Rate: 4kHz
- Analog Output
- Channels: 2
- Range: ±10V
- Resolution: 12-bit
- Capacity: 20mA
- Digital Input
- Channels: 3
- Type: Dry
- On Voltage Level: Close to GND
- Off Voltage Level: Open
- Digital Output
- Channels: 3
- Type: Open collector (Sink)
- Load Voltage: 10~40Vdc
- Max Load Current: 200mA/Channel
4/8-channel Current Input
2-channel Current Output
3-channel Digital Input
3-channel Digital Output
- Analog Input
- Channels: 4 (Differential) / 8 (Single-ended)
- Range: 0~20mA
- Resolution: 12-bit
- Sampling Rate: 4kHz
- Analog Output
- Channels: 2
- Range: 0~20mA
- Resolution: 12-bit
- Capacity: 20mA
- Digital Input
- Channels: 3
- Type: Dry
- On Voltage Level: Close to GND
- Off Voltage Level: Open
- Digital Output
- Channels: 3
- Type: Open collector (Sink)
- Load Voltage: 10~40Vdc
- Max Load Current: 200mA/Channel
1-port Non-Isolated RS-422/485
5-channel Isolated Digital Input
5-channel Isolated Digital Output
- Digital Input
- Channels: 5
- Type: Wet (Sink/Source)
- On Voltage Level: 10~50Vdc
- Off Voltage Level: 4Vdc Max
- Digital Output
- Channels: 5
- Type: Open collector (Sink)
- Load Voltage: 10~40Vdc
- Max Load Current: 200mA/Channel
- COM Ports
- Ports: 1 x RS-422/485
- Baud Rate: up to 115,200 bps
- Parity: None, Even, Odd, Mark, Space
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- FIFO Size: 128 bytes
2-port Non-Isolated RS-232
4-channel Isolated Digital Input
4-channel Isolated Digital Output
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 10~50Vdc
- Off Voltage Level: 4Vdc Max
- Digital Output
- Channels: 4
- Type: Open collector (Sink)
- Load Voltage: 10~40Vdc
- Max Load Current: 200mA/Channel
- COM Ports
- Ports: 2 x RS-232
- Baud Rate: up to 115,200 bps
- Parity: None, Even, Odd, Mark, Space
- Data Bits: 5, 6, 7, 8
- Stop Bits: 1, 1.5, 2
- FIFO Size: 16 bytes
8-channel Isolated Digital Input
8-channel Isolated Digital Output
- Digital Input
- Channels: 8
- Type: Wet (Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Min Pulse Width: 10ms
- Digital Output
- Channels: 8
- Type: Open collector (Sink)
- Load Voltage: 3.5~50Vdc
- Max Load Current: 700mA/Channel
8-channel Isolated Digital Input
8-channel Isolated Digital Output
- Digital Input
- Channels: 8
- Type: Wet (Sink)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Min Pulse Width: 10ms
- Digital Output
- Channels: 8
- Type: Open collector (Source)
- Load Voltage: 10~50Vdc
- Max Load Current: 650mA/Channel
5-channel Isolated Digital Input
6-channel Relay Output
- Digital Input
- Channels: 5
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Relay Output
- Channels:
- 2 x Signal Relay
- 4 x Power Relay
- Type: Form A
- Contact Rating:
- Signal Relay:
- 2 A @ 30 Vdc
- 0.24 A @ 220 Vdc
- 0.25 A @ 250 Vac
- Power Relay:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
- Signal Relay:
- Channels:
4-channel Analog Output
4-channel Digital Input
4-channel Power Relay Output
- Analog Output
- Channels: 4
- Range:
- ±5V, ±10V,
- 0~5V, 0~10V
- 0~20mA, 4~20mA
- Resolution: 12-bit
- Capability: 10V @ 20mA
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Relay Output
- Channels: 4
- Type: Form A, Power Relay
- Contact Rating:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
4-channel Thermocouple Input
4-channel Digital Input
4-channel Power Relay Output
- Analog Input
- Channels: 4 Single-Ended
- Range:
- ±15mV, ±50mV, ±100mV, ±500mV
- ±1V, ±2.5V, ±5V, ±10V
- ±20 mA, 0~20 mA, 4~20 mA
- J, K, T, E, R, S, B, N, C Thermocouple
- Resolution: 16-bit
- Sampling Rate: 10Hz (Total)
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Relay Output
- Channels: 4
- Type: Form A, Power Relay
- Contact Rating:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
4-channel Analog Input
4-channel Digital Input
4-channel Power Relay Output
- Analog Input
- Channels: 4
- Range:
- ±1V, ±2.5V, ±5V, ±10V
- ±20mA, 0~20 mA, 4~20 mA
- Resolution: 16-bit
- Sampling Rate:
- Normal Mode: 10Hz
- Fast Mode: 200Hz
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Relay Output
- Channels: 4
- Type: Form A, Power Relay
- Contact Rating:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
2-channel Analog Output
4-channel Digital Input
4-channel Power Relay Output
- Analog Output
- Channels: 2
- Range:
- 0~5V, 0~10V
- ±5V, ±10V
- 0~20mA, 4~20mA
- Resolution: 12-bit
- Capability: 10V @ 20mA
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Relay Output
- Channels: 4
- Type: Form A, Power Relay
- Contact Rating:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
8-channel Isolated Analog Input
8-channel Isolated Universal Digital I/O
- Analog Input
- Channels: 8
- Range:
- ±1V, ±2.5V, ±5V, ±10V
- ±20mA, 0~20mA, 4~20mA
- Resolution: 16-bit
- Sampling Rate:
- Normal Mode: 10 Hz
- Fast Mode: 200 Hz
- Digital Input
- Channels: up to 8 (shared with DO)
- Type: Wet/Dry (Source)
- On Voltage Level:
- Wet: 1Vdc Max
- Dry: Close to GND
- Off Voltage Level:
- Wet: 4~30Vdc
- Dry: Open
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Digital Output
- Channels: up to 8 (shared with DI)
- Type: Open collector (Sink)
- Load Voltage: 3.5~50Vdc
- Max Load Current: 700mA
4-channel Analog Input
2-channel Analog Output
4-channel Digital Input
4-channel Digital Output
- Analog Input
- Channels: 4
- Range:
- ±1V, ±2.5V, ±5V, ±10V
- ±20mA, 0~20mA, 4~20mA
- Resolution: 16-bit
- Sampling Rate:
- Normal Mode: 10 Hz
- Fast Mode: 200 Hz (Total)
- Analog Output
- Channels: 2
- Range:
- 0~5V, 0~10V
- ±5V, ±10V
- 0~20mA, 4~20mA
- Resolution: 12-bit
- Capability: 10V @ 20mA
- Digital Input
- Channels: 4
- Type: Dry (Source)
- On Voltage Level: Close to GND
- Off Voltage Level: Open
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Digital Output
- Channels: 4
- Type: Open collector (Source)
- Load Voltage: 10~40Vdc
- Max Load Current: 650mA/Channel
4/8-channel Counter/Frequency/Encoder Input
- Counter/Frequency/Encoder Input
- Channels:
- 4-channel Up/Down Counter (CW/CCW)
- 4-channel Dir/Pulse Counter (Bi-direction)
- 4-channel A/B Phase (Quadrant Counting)
- 8-channel Up Counter
- 8-channel Frequency
- Type: Counter, Frequency or Encoder, Wet Contact (Sink)
- Counter/Encoder Bits: 32-bit (4,294,967,295)
- ON Voltage Level: 5~24Vdc
- OFF Voltage Level: 3Vdc Max
- Frequency Accuracy:
- 1Hz ~ 200kHz: ±0.025% of Input Frequency
- 200kHz ~ 1MHz: ±0.1% of Input Frequency
- Individual Channel Configuration: Yes
- Counter Mode: Up or Up/Down
- Encoder Mode: CW/CCW, Dir/Pulse, AB Phase
- Max Speed: 1 MHz
- Channels:
8-channel Isolated PWM Output
- PWM
- Channels: 8
- Load Voltage:
- Internal Power: 5Vdc
- External Power: 3.5~50Vdc
- Output Max. Load Current:
- Internal Power:
- 5Vdc @ 10mA/Channel (Sink)
- 5Vdc @ 1mA/Channel (Source)
- External Power: 50Vdc @ 200mA/Channel
- Internal Power:
- PWM:
- Frequency: 1 Hz ~ 500 KHz
- Mode: Burst, Continuous
- Burst Count: 1 to 65535
- Trigger Start: Hardware or Software
