WISE-2200
Features
- 1GHz CPU
- Gigabit Ethernet
- MicroSD (32GB max.)
- I/O Expansion Board
- Modbus RTU/TCP support
- IF-THEN-ELSE Rule Engine
- SMS Command Receiving and Notification
- Connect with SCADA/HMI Systems
- Microsoft Azure & IBM Bluemix
Description
WISE IIoT Edge Controller is an Intelligent Web-based Multi-functions PAC controller designed by ICP DAS that functions as control units for remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive HMI web interface that allows you to implement control logic on controllers with just a few clicks, no programming is required. With this powerful and easy-to-use interface, it will minimize the learning curve, shorten time to market and dramatically reduce the labor and cost spent on system development.
Intelligent IIoT Edge Controller
- Runs on browsers, no extra software tool is required
- No more programming, Web pages provided for control logic editing
- IF-THEN-ELSE logic rules execution ability
- Support XV Expansion board
- Support DCON or Modbus RTU Slave modules (Up to 32)
- Support Modbus TCP Slave modules (Up to 16)
- Timer and Schedule functions supported
- Data logger and data files send back function supported
- Active I/O sending function for real-time data transfer
- CGI Command sending and receiving function supported for IP Camera and Network device
- Support Modbus TCP/RTU, SNMP, FTP and MQTT protocols
- Support LINE and Email real-time message sending
- Support Connection with IoT Cloud Platform (Microsoft Azure and IBM Bluemix)
- Support IoTstar Cloud Management Software
WISE-52xx/22xx I/O Module Support Specification
I/O Module Support | Description | Amount | |
---|---|---|---|
Local I/O Module | Local Bus | XV-Board series module | 1 |
Remote I/O Module | DCON by RS-485 | I-7000 series module | Up to 16 (each port) |
Modbus/RTU by RS-485 | M-7000 series module or any modules which support the Modbus/RTU Slave Protocol |
||
Modbus/TCP by Ethernet | (P)ET-7000 / WF-2000 series module or any modules which support the Modbus/TCP Slave Protocol |
Up to 16 modules | |
IP Camera | iCAM series cameras | Up to 4 cameras |
WISE-52xx / WISE-22xx Support List
I/O Type | I/O Function | Supported Modules | |
---|---|---|---|
Local Expansion XV-board |
DI / DO | DC Digital Input | XV110 |
DC Digital Output | XV111, XV111A | ||
DC Digital Input & Output | XV107, XV107A | ||
Relay Output | Power Relay Output | XV116 | |
Signal Relay Output | XV119 | ||
Others | Multi-Function | XV306, XV307, XV308, XV310 | |
I-7000 Module | AI / AO | Voltage & Current | I-7012, I-7012D, I-7012F, I-7012FD, I-7017, I-7017F, I-7017R, I-7017C, I-7017FC, I-7017RC, I-7017R-A5, I-7017Z |
Thermocouple | I-7011, I-7011D, I-7011P, I-7011PD, I-7018, I-7018P, I-7018R, I-7018Z, I-7019R | ||
RTD | I-7013, I-7013D, I-7015, I-7015P, I-7033, I-7033D | ||
Thermistor | I-7005 | ||
Transmitter | I-7014D | ||
Strain Gauge | I-7016, I-7016D, I-7016P, I-7016PD | ||
Analog Output | I-7021, I-7021P, I-7022, I-7024, I-7024R | ||
DI / DO | DC Digital Input | I-7041, I-7041D, I-7041P, I-7041PD, I-7051, I-7051D, I-7052, I-7052D, I-7053-FG, I-7053D-FG | |
AC Digital Input | I-7058, I-7058D, I-7059, I-7059D | ||
DC Digital Output | I-7042, I-7042D, I-7043, I-7043D, I-7045, I-7045D, I-7045-NPN, I-7045D-NPN | ||
DC Digital Input & Output | I-7044, I-7044D, I-7050, I-7050D, I-7050A, I-7050AD, I-7055, I-7055D, I-7055-NPN, I-7055D-NPN | ||
Relay Output | Power Relay Output | I-7060, I-7060D, I-7061, I-7061D, I-7063, I-7063D, I-7065, I-7065D, I-7067, I-7067D | |
Solid State Relay Output | I-7063A, I-7063AD, I-7063B, I-7063BD, I-7065A, I-7065AD, I-7065B, I-7065BD | ||
Photomos Relay Output | I-7066, I-7066D | ||
Others | Counter / Frequency | I-7080, I-7080D, I-7080B, I-7080BD, I-7088, I-7188D | |
M-7000 Module or Modbus/RTU Slave | Coil Output / Discrete Input / Input Register / Holding Register | ||
Modbus/TCP Slave | Coil Output / Discrete Input / Input Register / Holding Register | ||
iCAM Series Camera | IP Camera | iCAM-MR6322, iCAM-MR6422X, iCAM-ZMR8422X |
8-channel Isolated Digital Input
8-channel Isolated Digital Output
- Digital Input
- Channels: 8
- Type: Wet (Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Min Pulse Width: 10ms
- Digital Output
- Channels: 8
- Type: Open collector (Sink)
- Load Voltage: 3.5~50Vdc
- Max Load Current: 700mA/Channel
8-channel Isolated Digital Input
8-channel Isolated Digital Output
- Digital Input
- Channels: 8
- Type: Wet (Sink)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Min Pulse Width: 10ms
- Digital Output
- Channels: 8
- Type: Open collector (Source)
- Load Voltage: 10~50Vdc
- Max Load Current: 650mA/Channel
5-channel Isolated Digital Input
6-channel Relay Output
- Digital Input
- Channels: 5
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Relay Output
- Channels:
- 2 x Signal Relay
- 4 x Power Relay
- Type: Form A
- Contact Rating:
- Signal Relay:
- 2 A @ 30 Vdc
- 0.24 A @ 220 Vdc
- 0.25 A @ 250 Vac
- Power Relay:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
- Signal Relay:
- Channels:
4-channel Analog Output
4-channel Digital Input
4-channel Power Relay Output
- Analog Output
- Channels: 4
- Range:
- ±5V, ±10V,
- 0~5V, 0~10V
- 0~20mA, 4~20mA
- Resolution: 12-bit
- Capability: 10V @ 20mA
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Relay Output
- Channels: 4
- Type: Form A, Power Relay
- Contact Rating:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
4-channel Thermocouple Input
4-channel Digital Input
4-channel Power Relay Output
- Analog Input
- Channels: 4 Single-Ended
- Range:
- ±15mV, ±50mV, ±100mV, ±500mV
- ±1V, ±2.5V, ±5V, ±10V
- ±20 mA, 0~20 mA, 4~20 mA
- J, K, T, E, R, S, B, N, C Thermocouple
- Resolution: 16-bit
- Sampling Rate: 10Hz (Total)
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Relay Output
- Channels: 4
- Type: Form A, Power Relay
- Contact Rating:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
4-channel Analog Input
4-channel Digital Input
4-channel Power Relay Output
- Analog Input
- Channels: 4
- Range:
- ±1V, ±2.5V, ±5V, ±10V
- ±20mA, 0~20 mA, 4~20 mA
- Resolution: 16-bit
- Sampling Rate:
- Normal Mode: 10Hz
- Fast Mode: 200Hz
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Relay Output
- Channels: 4
- Type: Form A, Power Relay
- Contact Rating:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
2-channel Analog Output
4-channel Digital Input
4-channel Power Relay Output
- Analog Output
- Channels: 2
- Range:
- 0~5V, 0~10V
- ±5V, ±10V
- 0~20mA, 4~20mA
- Resolution: 12-bit
- Capability: 10V @ 20mA
- Digital Input
- Channels: 4
- Type: Wet (Sink/Source)
- On Voltage Level: 3.5~50Vdc
- Off Voltage Level: 1Vdc Max
- Relay Output
- Channels: 4
- Type: Form A, Power Relay
- Contact Rating:
- 6 A @ 35 Vdc
- 6 A @ 240 Vac
8-channel Isolated Analog Input
8-channel Isolated Universal Digital I/O
- Analog Input
- Channels: 8
- Range:
- ±1V, ±2.5V, ±5V, ±10V
- ±20mA, 0~20mA, 4~20mA
- Resolution: 16-bit
- Sampling Rate:
- Normal Mode: 10 Hz
- Fast Mode: 200 Hz
- Digital Input
- Channels: up to 8 (shared with DO)
- Type: Wet/Dry (Source)
- On Voltage Level:
- Wet: 1Vdc Max
- Dry: Close to GND
- Off Voltage Level:
- Wet: 4~30Vdc
- Dry: Open
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Digital Output
- Channels: up to 8 (shared with DI)
- Type: Open collector (Sink)
- Load Voltage: 3.5~50Vdc
- Max Load Current: 700mA
4-channel Analog Input
2-channel Analog Output
4-channel Digital Input
4-channel Digital Output
- Analog Input
- Channels: 4
- Range:
- ±1V, ±2.5V, ±5V, ±10V
- ±20mA, 0~20mA, 4~20mA
- Resolution: 16-bit
- Sampling Rate:
- Normal Mode: 10 Hz
- Fast Mode: 200 Hz (Total)
- Analog Output
- Channels: 2
- Range:
- 0~5V, 0~10V
- ±5V, ±10V
- 0~20mA, 4~20mA
- Resolution: 12-bit
- Capability: 10V @ 20mA
- Digital Input
- Channels: 4
- Type: Dry (Source)
- On Voltage Level: Close to GND
- Off Voltage Level: Open
- Counter:
- Max Counts: 32-bit (4,294,967,285)
- Frequency: 50Hz
- Min Pulse Width: 10ms
- Digital Output
- Channels: 4
- Type: Open collector (Source)
- Load Voltage: 10~40Vdc
- Max Load Current: 650mA/Channel
4/8-channel Counter/Frequency/Encoder Input
- Counter/Frequency/Encoder Input
- Channels:
- 4-channel Up/Down Counter (CW/CCW)
- 4-channel Dir/Pulse Counter (Bi-direction)
- 4-channel A/B Phase (Quadrant Counting)
- 8-channel Up Counter
- 8-channel Frequency
- Type: Counter, Frequency or Encoder, Wet Contact (Sink)
- Counter/Encoder Bits: 32-bit (4,294,967,295)
- ON Voltage Level: 5~24Vdc
- OFF Voltage Level: 3Vdc Max
- Frequency Accuracy:
- 1Hz ~ 200kHz: ±0.025% of Input Frequency
- 200kHz ~ 1MHz: ±0.1% of Input Frequency
- Individual Channel Configuration: Yes
- Counter Mode: Up or Up/Down
- Encoder Mode: CW/CCW, Dir/Pulse, AB Phase
- Max Speed: 1 MHz
- Channels:
8-channel Isolated PWM Output
- PWM
- Channels: 8
- Load Voltage:
- Internal Power: 5Vdc
- External Power: 3.5~50Vdc
- Output Max. Load Current:
- Internal Power:
- 5Vdc @ 10mA/Channel (Sink)
- 5Vdc @ 1mA/Channel (Source)
- External Power: 50Vdc @ 200mA/Channel
- Internal Power:
- PWM:
- Frequency: 1 Hz ~ 500 KHz
- Mode: Burst, Continuous
- Burst Count: 1 to 65535
- Trigger Start: Hardware or Software